Known Issues:

As of last testing we have observed the following issues. This list is as of 10/23/2007. Please note user experience may vary and some of these issues may have been resolved in later builds and only apply to the versions listed.

trixbox CE

2.2.3 - genzaptelconfig does not recognize our cards.

2.2.x> the 2.6.9 kernel does not properly implement apic and has poor IRQ managemen. Use of multiple high interrupt devices like Digital Cards in combination with each other, extra network devices or RAID will cause interrupt issues and instability.

2.2.4 Zaptel does not install. You can run yum -y install zaptel-*

Digital cards shipped after 10/05/2007 require a new driver use the 2.2.1 package in the beta directory of our ftp. If you recieved a digital card in a ceros this update has been made.

Zaptel version Does not build correctly. This seems isolated to this version

Some Qwest and Ameritech lines are not sending voltages across correctly. This issue may also occur in other AT&T regions. This issue can be overcome by upgrading your rcbfx firmware to 1.11.

Rhinosterisk 70021008-0917may not have an extensions.conf. You can correct this by rerunning install_amp

Some netgear routers will randomly reboot with qos and vlan enabled causing SIP delays.

Leave a Reply